Aeroquip AE102 Equivalent Firesleeve - SAE AS1072E Aerospace/Aviation Grade for Wire, Cable and Hose Protection from high temperature, heat, flame & fire
Allows qualified hose assemblies to pass AS1055D
500°F / 260°C Continuous Exposure; 2200°F / 1205°C Excursions; 3000°F / 1650°C Peak Short Term Exposure
Aeroquip AE102 equivalent aviation / aerospace grade high temperature, heat, flame and pyro resistant firesleeve jacket is manufactured to SAE AS1072E standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75.
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
Standard colors are oxide-red and black - other popular colors are silver-grey, blue, yellow and green. Available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 25 size steps.
Aeroquip Part Numbers (equivalent sleeve marked with SAE marking):
AE102-04, AE102-05, AE102-06, AE102-07, AE102-08, AE102-09, AE102-10, AE102-12, AE102-14, AE102-16, AE102-18, AE102-20, AE102-22, AE102-24, AE102-26, AE102-28, AE102-30, AE102-32, AE102-36, AE102-40, AE102-42, AE102-44, AE102-46, AE102-48, AE102-52, AE102-56, AE102-60, AE102-64
All trademarks and tradenames are property of their respective owners
SAE AS1072 Aviation Firesleeve Hose Protection