Main Form Products > Tapes > Tapes: Silicone - Aviation / Military
Silicone Rubber Electrical Tapes MIL-I-46852 / A-A-59163 / MIL-I-22444
All tapes meet 14 CFR 25.853(a) at amendment 25-116; Appendix F, Part I(a)(1)(i) (60 Second Vertical Flammability Test).
P840154-C4 Cessna Raytheon Textron 52672 Guideline Silicone Rubber Self Fusing Electrical Tape
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä P840154-C4 Cessna / Raytheon / Textron 52672 Beechcraft Hawker guideline equivalent silicone rubber electrical tape is a self-fusing self-amalgamating tape meeting A-A-59163 and MIL-I-46852 and other commercial specifications. The tape is used to form in-situ bushings to aid in strain relief. Popular for use in avionics wiring.
The tape has no adhesive, but sticks to itself (self-fuses or self-amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
The tape color is oxide-red.
This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts. Makes an in-situ bushing for protecting wiring at the backshell clamp.
Tested to and meets 14 CFR 25.853(a) at amendment 25-116; Appendix F, Part I(a)(1)(i) (60 Second Vertical Flammability Test).
Caravan, Grand Caravan, Citation
Cessna Raytheon Textron
P8400154 52672
Silicone Rubber Tape
Documents:
CofC / Test Reports