Order Desk (610) 906-3549
High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines , Equipment and Personnel
Follow us on Twitter for new product announcements
We will be closed Dec 24, 25, 31 2018 and Jan 1 2019
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Products > Fabrics / Cloth

Fiberglass Heat Cleaned Fabrics - Plain - Premium Grade


High Temperature Heat Resistant

1200°F / 648°C Continuous Exposure: Higher Intermittent

FlameShield™ high temperature, heat and flame resistant thermal insulating woven fiberglass cloth is heat treated to remove organics, set the weave dimensionally and reduce fray and loose fibers. Meets MIL-C-20079 (type I, Class 9) and US Coast Guard 164.009.

Used as a marine lagging fabric and in nuclear applications as a covering for insulation and board.

Designed for continuous operation at 1200°F / 648°C

Fabric is available in two weights; 8.5 oz/sq/yd (.018" thick) and 18.0 oz/sq/yd (.032" thick).  Roll width is available as 40 and 60 inches.

This fabric is also available with a self-adhesive backing.  The adhesive is acrylic based, and will burn-off or vaporize at temperatures above 400°F.  If prolonged use of the self-adhesive fabric above 400°F is desired, then alternate securing methods such as fasteners, wire or clamps should be used.  Personnel should avoid inhaling fumes from the PSA.

Fiberglass fabrics Heat Treated Cleaned Premium Grade
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Email: orders@abthermal.com
Web by ArcherTechnologies.com
Back to content