Parker Stratoflex 2650 Equivalent Firesleeve - SAE AS1072E Aerospace/Aviation Grade for Wire, Cable and Hose Protection from high temperature, heat, flame & fire
Allows qualified hose assemblies to pass AS1055D
500°F / 260°C Continuous Exposure; 2200°F / 1205°C Excursions; 3000°F / 1650°C Peak Short Term Exposure
Parker Stratoflex 2650 equivalent aviation / aerospace grade high temperature, heat, flame and pyro resistant firesleeve jacket is manufactured to SAE AS1072E standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75.
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
Standard colors are oxide-red and black - other popular colors are silver-grey, blue, yellow and green. Available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 25 size steps.
Parker Stratoflex Part Numbers (equivalent sleeve marked with SAE marking):
2650-04, 2650-06, 2650-08, 2650-10, 2650-12, 2650-14, 2650-16, 2650-18, 2650-20, 2650-22, 2650-24, 2650-26, 2650-28, 2650-30, 2650-32, 2650-36, 2650-40, 2650-42, 2650-44, 2650-46, 2650-48, 2650-52, 2650-56, 2650-60, 2650-64
All trademarks and tradenames are property of their respective owners
SAE AS1072 Aviation Firesleeve Hose Protection