Order Desk (610) 906-3549
High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines , Equipment and Personnel
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Products > Tapes: Silicone - Aviation / Military

Simrit® Freudenberg NOK Equivalent Type I & Type II Self Fusing Electrical Insulating Silicone Rubber Tape


365°F / 180°C Continuous Exposure: Higher Intermittent

Simrit® Freudenberg NOK equivalent silicone rubber self-fusing compression tapes meet many MIL and other specifications (such as MIL-I-46852 and AA-59163 and MIL-I-22444) and are used for a variety of critical electrical wiring and cable splicing and protection jobs.  Especially suited for aviation and marine environments, as well as outdoor weathering environments.

The tape has no adhesive, but sticks to itself (self-fuses or self amalgamating) when stretched and wrapped onto itself.  The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade.  This tape makes a waterproof, weatherproof and air tight protection.

These tapes may be either red or black.

Available unsupported (no fiberglass substrate) or supported (with fiberglass substrate); the substrate limits the stretch of the tape to a maximum of 15% elongation.  Unsupported tape has elongation of 300 to 500% minimum (thinner tape is 500%, thicker tape is 300%)

This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.

SIMRIT is a registered trademark of Freudenberg NOK.

SIMRIT Freudenberg NOK Type I Type II silicone rubber electrical insulating tape
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Email: orders@abthermal.com
Web by ArcherTechnologies.com
Back to content