Order Desk (610) 906-3549
High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines , Equipment and Personnel
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Products > Rope / Packing > 1200°F / 648°C - FIBERGLASS ROPE GROUP

Wire Mesh Jacketed Fiberglass Rope Kiln Gasket Rope Seal


1200°F / 648°C Continuous Exposure: Higher Intermittent

This high temperature, heat and flame resistant fiberglass gasket and seal rope is often used as a kiln door gasket/seal and as a seal on gas turbines, and is fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1100°F / 593°C.

This material resists most acids and alkalis and is unaffected by most bleaches and solvents.  It is highly flexible and conformable.  The base fiber is manufactured to the specifications of ASTM D-578, ASTM committee D13, and subcommittee D13.18.

The seals are then jacketed with a knitted 30 stainless steel wire mesh, providing significant abrasion resistance.  Supplied cut to length, each seal can be custom fabricated from a wide variety of diameters and configurations to provide the precise thickness and depth of seal for each U channel design specification. Pre-engineering each seal insures a simple, labor saving solution to the problem of containing heat. This efficient design reduces fuel consumption and eliminates cold spots in brick/tile kilns which can cause some of the brick or tile to be underfired.

View or Download PDF Catalog Page with Pricing


Fiberglass rope turbine engine exhaust gasket seal with stainless Mesh overbraid 4900159 F-E15600
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Email: orders@abthermal.com
Web by ArcherTechnologies.com
Back to content