Main Form Products > Tapes > Tapes: Silicone - Aviation / Military
Silicone Rubber Electrical Tapes
All tapes meet 14 CFR 25.853(a) at amendment 25-116; Appendix F, Part I(a)(1)(i) (60 Second Vertical Flammability Test).
Lockheed-Martin Space Systems 5-00857 & 5-00615 Silicone Rubber Self Fusing Tapes
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShield™ 5-00857 sinusoidal weave glass supported tapes meeting Lockheed-Martin Space Systems 5-00857 specification & 5-00615 non supported specification are used for a variety of critical electrical wiring and cable splicing and protection jobs. Especially suited for aviation and marine environments, as well as outdoor weathering environments.
The tape has no adhesive, but sticks to itself (self fusing or self amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
This tape is available as specified in oxide-red color.
Provides superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value.
This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts. Makes an in-situ bushing for protecting wiring at the backshell clamp.
Lockheed-Martin
5-00857 Tape
Lockheed-Martin
5-00615 Tape
Documents:
CofC / Test Reports